4CJ-1500 self-propelled tea picker
Product Details
This machine is suitable for tea picking, trimming, pruning, and other operations. By replacing blades, different operating procedures can be achieved, achieving the goal of multiple uses for one machine.
Scope of application for trimming operations:
1. Applicable line spacing: 1500mm;
2. Applicable height: 600-1100mm;
3. Adapt to contour lines below 20 °;
4. Adapt to upward sloping operations with walking slopes below 10 °;
5. Suitable for working in hard soil and flat tea gardens. Do not use this machine after rain or when the land is loose, as it may cause ground collapse and accidents.
Applicable scope of picking operation:
1. Applicable line spacing: 1500mm;
2. Applicable height: 600-1100mm;
3. Adapt to low contour lines as above.
4. Adapt to upward sloping operation and walk at the same slope as before.
5. Suitable for working in hard and flat tea shops, please do not use this machine after rain or when the ground is loose, as it may cause ground collapse and accidents.
Model | 4CJ-1500 | |
Walking mode | Rubber track type | |
Transmission mode of walking power | Engine hydraulic pump hydraulic motor drive | |
Size | entire length | 1630mm |
Full width | 1850mm | |
Full height | 1900 (2500) mm (including push-pull metal wire for operating systems) | |
Fast walking speed | 5km/h | |
Body weight | 580kg | |
Blade height range | Tea picking machine pruning machine light repair machine 600-1100mm | |
Deep repair machine, heavy repair machine 510-900mm | ||
Average ground contact pressure | 0.2kg/cm2 | |
Track gauge | 1500mm | |
Small rotation radius | 1600mm | |
From the perspective of safe operation | contour | Within 20 ° |
Direction of travel | Within 10 ° | |
Walking angle | Within 20 ° (with usage restrictions) | |
Work efficiency | 0.07-0.08hm2/h (single person operation) |
- Previous:J-60 multifunctional mixer
- Next:End